Rv carport

[doublearrow]

Look for a local weldor to build you one. Using Metal Mart material, it should be about $2500 I would think. I just finished a 24x24 carport that $2200. I would not build one of the hoop carports that are put up in a day. I have wrecked out quite a few through the years that were damaged from wind. They do not stand behind their products. I would think where you live that wind would be an issue and these do not hold up to high winds very well.

This would be ideal, and i have several welder friends. But being in Midland I dont know if i can get one over here to weld lol, they dont get enough days off.
I hired a company to build my knife shop (24x30) and many told me it was too small to mess with here, this carport will be even smaller. But i agree having it welded up would be my preference.

[Wil Taylor]

American steel carports. They put two up for me in menard last February. One is 18’x41’ and the other was 24’x26’.

They put them both up in about 5 hours.

[Wil Taylor]

[ATTACH]939359[/ATTACH]

[ATTACH]939360[/ATTACH]

[Stan R]

Carports.com They are national and the installers are all over.

I paid $4100 for a 41x21x12 height with extra bracing. They then moved it for me.

They have installed 2 for me.

[ColinR]

Carports.com They are national and the installers are all over.

I paid $4100 for a 41x21x12 height with extra bracing. They then moved it for me.

They have installed 2 for me.

Move as in disasimble, move, and reassemble?

What was the cost?

[Stan R]

Move as in disasimble, move, and reassemble?

What was the cost?

Yes the took apart and put back together. I think it was $800 ish I think I bought another one to put in front of conex the same day

[ColinR]

Yes the took apart and put back together. I think it was $800 ish I think I bought another one to put in front of conex the same day

Thanks. That sounds good.

[Wil Taylor]

I Pd $4500 for both of mine in above pictures. $2000 for the 24’x26’ and $2500 with 11’ legs for the 18’x41’.