I have seen several of you guys on here build the DIY Stand and Fill Feeders with 55 gallon barrel. I dont have a welder so I am going to get someone to build be one. Do you guys have pics and or measurements of yours?
-
-
Tagged -
Bite the bullet and get at 85 gal barrelComment
-
All-Season 600#....turn key, everything but corn. $524 drive out.Comment
-
Im weighing my options I could really do fine with a 300#, I live 7 miles from deer lease and East Texas deer dont suck up as much as other areas. My local dealer gets more than that for theirs though.Originally posted by Traildust View PostComment
-
-
This one is in the works in the garage. Is this what you are looking for? (I hate that the pic is correct on the computer, and then I try to upload it and...)Attached FilesComment
-
-
Bulverde Feed Store. 210-836-6892 Ask for Carl, the owner. We picked up 8 corn and timed protein feeders last month.Originally posted by axisbuck View Post
Solid units. Heres a lease members feeder pen we got set up.
Comment
-
Tell the welder you want the top of the barrel 6 ft 4
Sent from my iPhone using Tapatalk ProComment
-
I got a “boxed” all seasons 300 lb stand and fill, pretty sure it was $430 at bucees. But it doesn’t come with the battery or solar panel, I already had those so it wasn’t a big deal
This one.
Comment
-
This^^^^^. It will hold 12-13 bags of corn with no funnel in it. I had a base welded for $200. The barrel cost me $85 several years ago. My spinner has the Timer with a solar panel. Total cost was about $460. If you go with a 55 gallon drum you may only pay $20 for a barrel. Have to fill it more often though.Originally posted by RascalArms View PostComment
-
I live 6.7 miles from the lease. So I think I’d be good with 50 gallonOriginally posted by ByronB View PostComment
Comment