Announcement

Collapse
No announcement yet.

Light bar issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Light bar issue

    Anyone ever have this issue with a new light bar? Thought it may be a bad ground but it’s grounded on the negative battery post with the rear light bar and the winch and they both work fine. I’ve traced the wires and everything looks correct. Only some of it lights up. Possible faulty light?
    Attached Files
    Last edited by RaginCagin; 02-05-2018, 05:46 PM.

    #2
    what about if you bypass the switch and relays? still same problem means bad light probably.

    Comment


      #3
      Originally posted by duckmanep View Post
      what about if you bypass the switch and relays? still same problem means bad light probably.
      Just tried that and it worked. Apparently it’s something on the positive side but not sure what it could be. When i ran the positive straight to the battery the entire bar came on.

      Comment


        #4
        Start hooking everything else up and try it out each time you add something, until you find the problem. If you have a meter, you can test the continuity on the switch and wires.

        Sent from my XT1080 using Tapatalk

        Comment


          #5
          Replace the relay. Done it several times


          Sent from my iPhone using Tapatalk

          Comment


            #6
            Bad relay of u can hook it up to batt and it works
            I'm old school Id just wire it straight to batt with in line fuse on pos

            Comment

            Working...
            X