Announcement

Collapse
No announcement yet.

I got my Krivoman blind on a new platform with new deerview windows....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    I got my Krivoman blind on a new platform with new deerview windows....

    This was one of the original Krivoman blinds...I bought from him back in 2012.

    I have been using the shell on the ground with a dirt floor since I first got it. I enjoyed how easy it was to move around and setup quick.

    I decided this year I was finally going to add a floor on a platform and set it up at my new bow spot.
    Started doing some research and searching through old D-I-Y threads, I chose on building a 5ft 10” frame.
    I used 14 gauge 1” square tubing and cut two pieces of plywood in an 82” circle.
    Jeremy is a whole lot better welder than I am so got him to weld the frame up for me.
    I also went with 15” legs on the frame so it will set over the fender wells and slide in on a 6ft trailer.




    I bought two new deerview deluxe hinge windows and changed out the windows I had in it before. These are my favorite bow windows. They are very well made and mount on the outside.
    Thought I’d share a few pics. I absolutely love this blind and super excited about getting it all done. This is one of my favorite bow setups I’ve had so far.



    Here’s some pics finished and setup at my new spot called “Mushroom”.
    Touched up my old paint job a bit while I was at it.
    Just ignore/overlook the ugly silicone job I did on the windows. Lol.









    Sent from my iPhone using Tapatalk

    #2
    Nice!

    Comment


      #3
      That looks great!

      Comment


        #4
        Nice looking set up Brandon!

        Comment


          #5
          I like it!

          Comment


            #6
            Looks GREAT Brandon! Have you considered adding a vent to it? I had one of the originals and now several with a vent. Makes a world of difference in the heat.

            Comment


              #7
              Originally posted by roysmoke View Post
              Looks GREAT Brandon! Have you considered adding a vent to it? I had one of the originals and now several with a vent. Makes a world of difference in the heat.
              I have thought about it...I probably need to get that done soon. Lol

              Comment


                #8
                Nice setup. Where did u get that deer/skull stencil?

                Comment


                  #9
                  Originally posted by CoolArrow View Post
                  Nice setup. Where did u get that deer/skull stencil?
                  I made it. I’ll take a pic of it later on today.

                  Comment


                    #10
                    That looks great Brandon.


                    Sent from my iPhone using Tapatalk

                    Comment


                      #11
                      Looking good, Brandon

                      Comment


                        #12
                        Nice looking setup ! Hard to ignore that silicone job though, it looks like something I would do.......

                        Comment


                          #13
                          Looks nice , I got Four of them, no paint on any of mine.

                          Comment


                            #14
                            Originally posted by Drycreek3189 View Post
                            Nice looking setup ! Hard to ignore that silicone job though, it looks like something I would do.......
                            I’m really embarrassed on that...It looks pretty bad. Lol!!
                            I wish I wouldn’t have left it looking that way. I ran out of rubber gloves and got side tracked. I noticed it again when I took pics.

                            Originally posted by Fat Pappy View Post
                            Looks nice , I got Four of them, no paint on any of mine.
                            I like tagging my stuff but It’s really not needed. Sometimes I think they blend in better left alone.

                            Comment


                              #15
                              prob need a vent pretty quick. no vent on wood platform will cause sweating issues leading to wet wood. good job on platform.

                              Comment

                              Working...
                              X