I put my new Ripcord on and got the Fp's hitting perfect at 20 and 30 yards and decided to BH tune. the BH's hit about 8 inches high and the arrow seemed to fly very poorly. I raised the D-loop because I thought I was getting some vane contact and after doing this they were right on but the field points are now about 4 inches low. What do I need to do?
-
-
Is your bow paper tuned? -
I been to two pro shop and they have never said the words. This is the first rest I have mounted myself.Originally posted by Browning2008 View PostComment
-
Hmmm. what kind of BH's are you using?Comment
-
I shoot 100 grain 3 blade Muzzy and 100 grain magnus Buzzcuts and the both flew perfectly from a WB.Originally posted by Browning2008 View PostComment
-
You might want to go to a Pro-shop and have them look it over. Paper tune it while your there just to make sure thats not the problem...Comment
-
You are doing well ignore most of these posts.
When you make a movement the BH's will move more than the Fp's.....the BH will "chase" the FP.
When you raised your loop your groups should have dropped. And the BH is hitting closer to the FP. Keep adjusting until the arrows meet.Comment
Comment