Announcement

Collapse
No announcement yet.

Bass Boat Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Bass Boat Question

    I have a question about a drain on my 87 Champion bass boat that I just got. I know the bottom is the bilge drain, and the outside 2 are livewell fills & drains. The one on the left has a crack in the line and will fill up the boat (that is why it has a plug in it). What does the middle one above & slightly left the drain go to? I'm assuming in might be the livewell overflow drain, but I wouldn't think it would be below the water line. Also does it need a strainer on it?

    Thanks

    PS. I had a small offshore boat years ago and it only had one drain at the back, so this is a little different for me
    Attached Files
    Last edited by careybirdwell; 12-20-2017, 05:25 PM. Reason: Add picture

    #2
    Onboard cooler?

    Comment


      #3
      Easy enough to figure out. Fill the live well til it runs out the overflow. If it comes out that tube you have your answer. Only intakes need strainers.
      Last edited by Walker; 12-20-2017, 07:08 PM.

      Comment


        #4
        Yep park in driveway and fill the live wells and cooler that will tell you pretty quick.

        Comment


          #5
          The strainer makes me think it’s an inlet to something, filtering out trash from the lake

          Comment


            #6
            Right one is the livewell intake I believe. Probably had one on the left too. Looks like some redneck engineering IMO. Bottom one is the bilge drain


            Sent from my iPhone using Tapatalk

            Comment


              #7
              I'm with cooler drain crowd.

              Comment


                #8
                Middle one should be the drain for the livewells. Most coolers and livewell overflow just spill into the bilge area.

                Comment


                  #9
                  Originally posted by Slew View Post
                  Right one is the livewell intake I believe. Probably had one on the left too. Looks like some redneck engineering IMO. Bottom one is the bilge drain


                  Sent from my iPhone using Tapatalk
                  Originally posted by Slew View Post
                  Middle one should be the drain for the livewells. Most coolers and livewell overflow just spill into the bilge area.

                  That's how I see it too.

                  Comment


                    #10
                    If you have a valve for your live wells thats the drain for them.

                    Comment


                      #11
                      The one with nothing on it should be another drain and filler for the livewell just like the one with the strainer on it if that's the one you are asking about?

                      Comment


                        #12
                        Originally posted by adam_p View Post
                        That's how I see it too.
                        x2

                        Comment


                          #13
                          The two on the outsides are inlets for the livewell's. Middle one is a drain for both.

                          Comment


                            #14
                            Originally posted by Smithwr View Post
                            The strainer makes me think it’s an inlet to something, filtering out trash from the lake
                            this

                            Comment

                            Working...
                            X