Don't Flame me but I got a SERIOUS Rage Question

[MountainMan]

So, I bought some 2-Blade Rage the other day and while shooting them, I noticed something. When the blades are folded, they lock just fine, but after they deploy, they flop all over the place , is that normal or should I find someway to tighten down a hair?


Thanks,

MountainMan

[Kevin]

Its the flop of death. (ie its normal)

[Green Arrow]

Its the flop of death. (ie its normal)

yup they just do that.
Tried them this year and was not impressed.

[DrenalinJunkie]

thats normal......... once they have blasted through your prey, their job is done!

[LostHawg]

I've found the best way to cure that is find you a good cut on contact fixed blade head.

...like the STOS or RibTek...

[glen]

I dont have an answer for you but I will tell you I that I would rather put my dog down on a marginally shot animal with a Rage over most other heads.

[jyoung]

I think that is due to the o-ring being shot out. Check them and make sure they are not torn. If they are replace them. I shoot the three blade version so maybe there is a difference in the two.

[k9trainer]

I think that is due to the o-ring being shot out. Check them and make sure they are not torn. If they are replace them. I shoot the three blade version so maybe there is a difference in the two.

He's right, most of the time you can replace the o-ring and it will sit back down.