Hey guys and gals,
I've run into a problem with my feeder and hogs. How do I prevent this from happening. I don't know why but the hogzilla seems to attack this feeder.
On 9-23-2017 I reset this feeder after being toppled by Hogzilla. I put 12"x12" squares under each leg with screws going inside the center of the pipe. I then drove 2 12" stakes for each leg in the ground to secure the 12"x12" from sliding or moving. I then sank 3 Tpost into the ground about 2 to 2 1/2 foot and wired the legs to those t-posts.
Fast forward to 10-20-2017 and this is how I found my feeder. Any suggestions? Dealing with a 275 to 300 pound monster. Have him on camera but he only visits at night.
Dad's standing in one of the holes this things digging. I wanna shoot the **** thing but that would require me setting up lights or buying a NV optic.
I've run into a problem with my feeder and hogs. How do I prevent this from happening. I don't know why but the hogzilla seems to attack this feeder.
On 9-23-2017 I reset this feeder after being toppled by Hogzilla. I put 12"x12" squares under each leg with screws going inside the center of the pipe. I then drove 2 12" stakes for each leg in the ground to secure the 12"x12" from sliding or moving. I then sank 3 Tpost into the ground about 2 to 2 1/2 foot and wired the legs to those t-posts.
Fast forward to 10-20-2017 and this is how I found my feeder. Any suggestions? Dealing with a 275 to 300 pound monster. Have him on camera but he only visits at night.
Dad's standing in one of the holes this things digging. I wanna shoot the **** thing but that would require me setting up lights or buying a NV optic.
Comment