Nice!!!!
Announcement
Collapse
No announcement yet.
Barndo build
Collapse
X
-
Originally posted by Tbone3636 View Postgot most of the metal today, I put a coat of primer on the I beam. I figure once this is done I’ll never see it again, so why not. Makes for a sore back and legs.
Sent from my iPhone using Tapatalk
Comment
-
Originally posted by sendit View PostYup, painting is very low on my list of things I like to do. When I painted my beams I used an airless which sped the process up alot. It's alot easier painting the beam on the ground before they are installed.
I bought a $8 dollar special harbor freight spray gun, and it worked good as long as I cleaned it haha
Sent from my iPhone using Tapatalk
Comment
-
Been a little bit sorry just now updating, they are almost done with the metal framing and should start sheeting on Monday, Windows should be installed this week. Lumber has been order for delivery next. Pulled the welders off to help me put up 1700’ of new fence w/ a couple gates and a water gap
Sent from my iPhone using Tapatalk
Comment
-
the original center wood beam was engineered at 2’ wide x 38’ long, after doing some modifications we welded a 8” I beam in the eave and welded some 6” x 3/8 strap down and lag bolted it to the middle wood beam. This allowed for us to use 2 x16” LV which cut the cost in half and we should be able to pull a car up with it now
Sent from my iPhone using Tapatalk
Comment
Comment