Thnuderheads versus Slick Tricks -- o-rings

[Smart]

Used to shoot Thunderhead 125 many moons ago and have purchased Slick Tricks 100s for my new rig. A buddy of mine and I were talking about how we liked the "black o-ring" that came on the Thunderheads as it helped you line up your broadhead where you wanted it. Curious as to where I might be able to find some of these smaller o-rings to fit over my Slick Tricks....only place I could think of was a bearing/seal shop?.....but I doubt they carry them that small.

[TidwellExt]

Just about any mom and pop hardware store should have them.

[Tomme]

Smart will the Thunderhead 125s fit? If so I could send you some. I've got extra.

[stxhunter]

Dont they sell the o-rings by them selves as well? I may be mistaken, but I could have sworn that I saw those o-rings for sale online or in some catalog somewhere.

[Smart]

Dont they sell the o-rings by them selves as well? I may be mistaken, but I could have sworn that I saw those o-rings for sale online or in some catalog somewhere.

Point me in the right direction......

[Smart]

Smart will the Thunderhead 125s fit? If so I could send you some. I've got extra.

yes they will........PM sent.

[Larry]

Are you planning on lining up the SlickTrick four blades with your three vanes?

Maybe I'm just not thinking enough any more. I used to try to line my fixed blades up like that, used to spin test
arrows to match heads to shafts, etc. Once I started using SlickTricks, I just screw them on and kill things!
It's almost like the four blades prevents planing like I've heard some three blade fixed heads might do.
Every once in a while I will shoot a field tip with my ST's. Dead on every time.

[Smart]

Are you planning on lining up the SlickTrick four blades with your three vanes?

Maybe I'm just not thinking enough any more. I used to try to line my fixed blades up like that, used to spin test
arrows to match heads to shafts, etc. Once I started using SlickTricks, I just screw them on and kill things!
It's almost like the four blades prevents planing like I've heard some three blade fixed heads might do.
Every once in a while I will shoot a field tip with my ST's. Dead on every time.

True........I'm used to shooting three blades......

I found them here though.....FYI

http://www.keystonecountrystore.com/Broadhead_Adapters_-_O-Rings.html

[Arrowsmith]

You need to use the steel washer supplied with the Tricks. Screw them on, make sure they spin clean and shoot them.

[Hunt NXS]

Any Lowes, Home Depot , Ace Hardware or plumbing supply will have an ample amount of o-rings.

[stxhunter]

Did a quick search in google and this is what I found http://mickiesplace.com/store/catego...DHEADS/?page=1

They have the o-rings and the lock rings, 6 pack for under $4.00, hope this is what your looking for.