Calling all reloaders!!!!

[ColinR]

How many of you do this step of adding lube to the inside of case neck? I never have and haven't had a problem....yet. Just curious if the rest of you are lubeing the inside of the case neck.

[M16]

Always. I usually use Hornady One Shot and spray inside the necks.

[Walker]

I have never! Right or wrong.

[brandonsbird02]

Didn't once and still have a 30.06 case stuck.

Sent from my SAMSUNG-SM-G935A using Tapatalk

[6.5 shooter]

Always. I usually use Hornady One Shot and spray inside the necks.

X2

[PondPopper]

Didn't once and still have a 30.06 case stuck.

Sent from my SAMSUNG-SM-G935A using Tapatalk

How did not lubing the inside of the neck cause this?

[PondPopper]

It helps with bullet seating and resizing(expander ball)friction.

[ColinR]

Always. I usually use Hornady One Shot and spray inside the necks.

Are you holding each case right up to the spray tip so not to get any on the outer shoulders, or just standing your cases up in the loading block and just spraying down on several cases at once and then wiping the lube off the shoulders?

[brandonsbird02]

I dunno. But case is stuck in my die. Haven't got another 30.06 so haven't worried bout it in awhile


Sent from my SAMSUNG-SM-G935A using Tapatalk

[PondPopper]

I dunno. But case is stuck in my die. Haven't got another 30.06 so haven't worried bout it in awhile


Sent from my SAMSUNG-SM-G935A using Tapatalk

Oh "stuck in your die"..
Lack of case lube will cause this.

[Ryan81]

I just spray the whole bunch down and wipe the outside after. It doesn't take long.


Sent from my iPhone using Tapatalk

[Mike D]

Always. I usually use Hornady One Shot and spray inside the necks.

Yup, this.


Sent from my iPhone using Tapatalk Pro

[kmitchl]

Never had a problem with 30-06 cases and all the derivatives. I always lube the inside of 308 cases and the derivatives.

[6.5 shooter]

I dunno. But case is stuck in my die. Haven't got another 30.06 so haven't worried bout it in awhile


Sent from my SAMSUNG-SM-G935A using Tapatalk

I have a tool to remove it. If you want to mail it to me I can fix it for you.
I've only used the tool once and it's collecting dust...lol

[Drycreek3189]

I still use a pad, because I'm old school. I generally just wipe a little from my finger to the case mouth. Works for me.