Wondering what measures others here take to seal their rifle blinds up? Finally got on a lease and a previous tenant was kind enough to leave a very nice 5x5 elevated blind in my spot. (yay me) It needs some minor repair but overall design and construction are very good. Last weekend I cleaned it all out, threw down a 2 inch layer of cedar shavings on the floor and temporarily sealed it shut with some cedar fence board screwed over the door and some prior critter/rain damage.
The windows are decent with a wire pull method to raise and lower. What I'm thinking is to put actual metal window screens on the inside attached with magnetic tape. This way I can raise the wood window covers (they swing out) and still get the breeze and be relatively protected from bugs in case I decide to stay all night in the blind. I'll have to add some wood or hard foam pieces to make the frame around the interior of the windows flush all the way around. Pics below.


The windows are decent with a wire pull method to raise and lower. What I'm thinking is to put actual metal window screens on the inside attached with magnetic tape. This way I can raise the wood window covers (they swing out) and still get the breeze and be relatively protected from bugs in case I decide to stay all night in the blind. I'll have to add some wood or hard foam pieces to make the frame around the interior of the windows flush all the way around. Pics below.



Comment