Guys picked up my new blind this week and was just curious how y'all were setting up ozonics, shelves and anything else y'all might be doing to set up y'alls blind. I will have it on a platform 5’ off the ground. Thanks for any info y'all have.
Announcement
Collapse
No announcement yet.
Krivoman blind setup.
Collapse
X
-
Originally posted by byrne361 View PostGuys picked up my new blind this week and was just curious how y'all were setting up ozonics, shelves and anything else y'all might be doing to set up y'alls blind. I will have it on a platform 5’ off the ground. Thanks for any info y'all have.
-
Originally posted by roysmoke View PostI used to use a tripod for my ozonics in the Krivoman. I recently made a mount with a security camera arm and neodymium magnets that will hold the ozonics directly over the window for you. Feel free to send me a pm if you want more information. Best blinds I've ever hunted out of. Did you get a vent in yours?
Yes I got a 3 window classic with a vent.
Comment
-
Awesome! The vent helps a bunch when it's hot. I believe I got them from this site.
I got ones that have a hole in the middle so I could tie a string to it and have the other end outside the window. It it falls, the string doesn't let it go too far. I got the magnets with close to 100lb holding weight. I have two on the camera arm and one on the string. Don't let the one on the string touch the others. It is VERY hard to get them apart. They have so much pull they can hold the ozonics through your hand.
Here is the camera arm on Amazon.
Comment
-
I use a similar mounting system, but instead of magnets I use a ball and socket system. I placed the ball between the window and the vent and then can easily change the position of the Ozonics if the wind shifts.
These the parts I used.
And here are a couple pics mounted inside the blind:
I have three blinds and have a ball mounted in each, just take the arm with you. The ball screws into the Ozonics.
Comment
-
Originally posted by JES View PostI use a similar mounting system, but instead of magnets I use a ball and socket system. I placed the ball between the window and the vent and then can easily change the position of the Ozonics if the wind shifts.
These the parts I used.
And here are a couple pics mounted inside the blind:
I have three blinds and have a ball mounted in each, just take the arm with you. The ball screws into the Ozonics.
Is that the vent that came in you blind originally? Or did you add that one?
Sent from my iPhone using Tapatalk
Comment
-
Originally posted by JES View PostI use a similar mounting system, but instead of magnets I use a ball and socket system. I placed the ball between the window and the vent and then can easily change the position of the Ozonics if the wind shifts.
These the parts I used.
And here are a couple pics mounted inside the blind:
I have three blinds and have a ball mounted in each, just take the arm with you. The ball screws into the Ozonics.
Comment
Comment