Arrow selection

[BoneDigger]

I was going to post in equipment and tuning but TT won't let me. So, I have been perusing the charts, but I wanted to check the collective wisdom of TBH.

I just bought a used Elite Victory 37. It is srt at 60 lbs or thereabouts. Draw length around 29.5 inches. Shooting 100 grain points, what spine or arrow weight should I buy? Some charts show 340s and some 500s. What would you guys recommend for a carbon arrow? This will be 99 percent used for target and 3D.

Todd

Sent from my LG-US996 using Tapatalk

[kd350]

What brand of arrow you want to shoot? Every manufacturer is going to have a different spine rating


Sent from my iPhone using Tapatalk Pro

[12RingKing]

You should be in the 340 to 400 spine with those specs. It would greatly depend on your arrow length.

I'm sure someone could plug it in to OT2 for you. I would but I don't have it anymore.

If I was going to use it for 3D only, unless you have speed limitations, I would find something fat and lightweight. I use to shoot Easton Fatboys for 3D

[enewman]

If your arrow is 29 inches 400 spine this puts you on the line. You would be better to go to the 340 spine.

[popup_menace]

Listen to Newman.

[BoneDigger]

Thanks guys!

Sent from my LG-US996 using Tapatalk