Need some advice

[Trkhunter]

I'm replacing the deck on my trailer and it seems most of the screws holding to the trailer broke off and are stuck. How can I get the broken ones out. I'll try to attach a pic.

[big_smith]

I would grind them off and not replace them at all. Just let the boards float. Put a strip of 1" strap across the front and back.

[bwssr]

I would grind them off and not replace them at all. Just let the boards float. Put a strip of 1" strap across the front and back.

yep

[RedRaider323]

Cut them off with a grinder and drill the rest out.

[bboswell]

Self tappers, don't try to reuse the hole. Grind off and drill new holes

[Trkhunter]

Self tappers, don't try to reuse the hole. Grind off and drill new holes

I'll try this first and see how it goes

[tgil]

Yep, grind those off and use the torx head self tappers. Work like a charm!

Sent from my SM-G930V using Tapatalk

[Graysonhogs]

Self tappers, don't try to reuse the hole. Grind off and drill new holes

This ^^^^^^

[fullsizeaggie]

Just redid a deck this weekend. Put flat metal on both ends. I did run 2 rows of screws across, one near the front and one near the back. I just like it that way. Helps keep the gaps closed on the boards.