What you should do is install 2 deep six hit inserts (20 gr each) up front and use a 100 grain head, there are not very many to choose from in 125 grain. If you have to shoot one in 125 grain, I would shoot the solid legends and not look back. I have had great luck with them. Good luck.
I had awesome luck with grim reapers 1 3/8 over there but for non expandable my favorite is QAD exodus swept blades. They're very accurate and cut a big hole
Would it still be considered a 2 blade by your ph?
I did consider them and I'm not sure if he would or not. I did order some of the 125's with 3/4 inch bleeder. I also ordered some of the ramcats. I might just make a gel block with plywood in it and have some fun.
I did consider them and I'm not sure if he would or not. I did order some of the 125's with 3/4 inch bleeder. I also ordered some of the ramcats. I might just make a gel block with plywood in it and have some fun.
You can / will bend blades on RC's but no more and probably less that you will on a mech. They're also penetrating fools.
Comment