Arrow Help

[ateague11]

Currently my arrows are 464 grain Easton Bloodlines 330s at 29". 75 gr brass inserts, 100grain broadleads with nocturnal nocks. My draw weight is 70lbs.

Curently this give me a FOC around 12%, I want to put a 125grain broadhead to increase my FOC but wanted to be sure my 330 spine is enough.

Let me know your thoughts

[ateague11]

Anyone

[BowOnly81]

Let me tell you what I did. I tried 50 gn inserts with 125 BHs and it gave me 14 FOC and couldn't tune my bow with my .350 arrows. Traded the 50gn inserts for 12gn and shooting bullets thru paper now. Surprised you're shooting 175gn up front without a .300 spine. You're shooting good thru paper?

[ateague11]

Let me tell you what I did. I tried 50 gn inserts with 125 BHs and it gave me 14 FOC and couldn't tune my bow with my .350 arrows. Traded the 50gn inserts for 12gn and shooting bullets thru paper now. Surprised you're shooting 175gn up front without a .300 spine. You're shooting good thru paper?

I haven't shot it thru paper yet

[ateague11]

any other input?

[Stoof]

Whats is your DL? You can stiffen them up a bit by cutting them shorter. And yes shoot through paper then french tune.

[ateague11]

draw length is 29"...cant cut them shorter arrows are already made

[Stoof]

You can pull the inserts with some heat on a field tip. To much heat and you will fry the carbon. Been there. Done that.


------------------------------------

Violence never settles anything.
-Genghis Kahn