Elite's Website is up and running

[Cotton]

Saw where Luckie posted a picture of his cron at 347!

I'm looking at the "Ice" for Cat.

[ezed3354]

Check with Scott at Viking archery. THey have the Synergy in stock. Boy is it a smooth draw and I love the back wall.

[Trick]

Elites

Lefties are coming Chuck. Will they lock up if you don't have the draw stop peg in place? Yes, but only at certain draw lengths with certain draw mods. If that makes sense. For example it will lock up using the long mod(old style) set at 29", I found this out the hard way, but it won't if you use the short mod set at 29 inch. I haven't tested all the draw lengths out but I do know that 27, 27 1/2, 28, and 29 with the short mod(again old style) it will not lock up. The only reason to use it is to give you a solid wall in my opinion. But to be safe always use it.
The new style mods that come with the Synergy's now are different than the original mods shipped. The short mod covers lengths from 27 - 29, and the long mod covers 29 1/2 to 30. I don't know this for sure but I suspect they did this to get rid of that one case where it would lock up without the peg in place. Hope this helps.

I'm setting one up now for Rudyl and here are the specs so far:

27 1/2" draw length
62-63lbs

Maxima 250 at 336gr = 292fps
CX Hunter 200 at 363gr = 282fps
CX Hunter 300 at 394gr = 273fps

Rudy's actual arrow will be a Maxima Hunter 250, which should weigh in at 355gr with an arrow speed of ~285fps. On the string are Bowjacks, 1/4" peep, and a string loop. I know speed isn't everything, but when you can get it with a quite bow, thats forgiving, and is very accurate it's a plus. I hope to get a few more fps out of it once I'm finished tweeking it.

Can't wait to get my hands on a Envy!

[kornsqueezer]

Rattler said the V ... Word. LOL

[Trick]

Viking

BTW, speaking of Viking. Scott's making some nice grips for the Elites too.

[Rattler]

Ksqueezer, Its not the Viking of old....Trust me. Scott has the place in tip top shape!

Trick I have my eyes on a black 1 piece grip Scott makes for them!

[VorTexan]

Elite's Website is up and running

Yes, but is the company running?

[Rattler]

The COMPANY is going full steam frm what I hear and will be able to produce more bow faster really quickly

[txdukklr]

wow barnsdale limbs on a bowtech and the specs are a bit superior.

I office a mile from viking, i think i'll cruise on down and take a look when it's time for a new bow. Looks like a great performing rig!!!!

[Epack]

cool

[wacm]

rattler- i didnt know you could be an elite rep. and not even own one of them.

[bboswell]

wacm - if you are refering to Viking then they own several...........at least they did last Thursday.

Went in to say hi to Scott.....sure was a much better atmosphere in there without Tim!

Archery Country is a dealer...........thats where I got my Elite E-500, great folks there, I sure wish they were closer to where I live.

[Trick]

Elite grips

Here are a couple of Elite grips Scott made fo me.