I have a few rage heads that are in need of sharpening and can not find a allen wrench that will fit them. Can anyone tell me where i can find one. I bought a pack of the replacement blades and thought that a wrench would be included but there was nothing in the package. Thanks for your help ahead of time.
-
-
Good luck getting the screw out undamaged.
-
I use wrenches from a hobby shop, allen heads with handles like a screw driver....let them soak in WD-40 for a little bit to loosen the gunk around those tiny screws...Comment
-
It's an 0.050" size. Should be in any full sized set of standard allen wrenches.Comment
-
For the three blade, I needed something smaller than the .05 to get the blades off...couldn't find one, so I just bought new packages instead of doing replacements.Comment
-
Originally posted by bearintex View Post
Bingo, but they are a pain to get out. Out of my three heads one of the screw heads stripped with little pressureComment
-
Tirck I found on small allen heads like that is to make sure there is NO trashh down in the hole. You have to get full penetration into the screw for maximum grip on the wrench. I use a dental pick for that. Also once you strip one out, throw the wrench away, it'll do nothing but strip more. A little PB blaster helps as well.Comment
Comment