Fixed blade broad head help.

[cwd500]

I was trying to shoot my slick trick mags but the blades are hitting my riser when I draw and the arrow is falling off. Mechanicals shoot fine. What do I need to do?


Sent from my iPhone using Tapatalk

[muddyfuzzy]

Tricks aren't overly large on their cutting diameter, most folks can get them all the way to the rest without any issues. What kind of bow do you shoot? Do you have a pic of the problem?


Sent from my iPhone using Tapatalk

[cmh2007]

Im curious about bow setup, I'm thinking the rest and nocking points are both too low

Sent from my SAMSUNG-SM-G900A using Tapatalk

[oktx]

Turn your nock where they don't touch?

[Cajun shooter]

Sounds to me like your arrows are too short.



Chootum!

[CastAndBlast]

Longer arrows

[enewman]

I'm thinking you should of found this out before now it's only 3 days till opening day. Lol

[cwd500]

Tricks aren't overly large on their cutting diameter, most folks can get them all the way to the rest without any issues. What kind of bow do you shoot? Do you have a pic of the problem?


Sent from my iPhone using Tapatalk

Pse dream season DNA code red fall away rest.

I'm thinking you should of found this out before now it's only 3 days till opening day. Lol

I am thinking the same but a limb cracked on my bow and I just got it back the other day. I got to shoot the other day but all I did was sight it in with field points. For now I'll just shoot my rages till I can get it looked at.



Sent from my iPhone using Tapatalk

[Mudslinger]

Something is not right with your rest set up or your tuning or both. that bow should have no problem with BH clearance with a normal set up.

Might need to start from scratch with some help.

[muddyfuzzy]

Fixed blade broad head help.

Pse dream season DNA code red fall away rest.


Sent from my iPhone using Tapatalk

Yeah you shouldn't have a riser or shelf contact problem with your set up. Something else isn't right causing your problems.



Sent from my iPhone using Tapatalk

[Low Fence]

If you just had bow put back together, could be excessive cam lean, rest windage, extreme hand torque.

Who set the bow up? If it's any "box" store I'll guarantee improper set up.

Does arrow, at rest look angled toward riser?

[hoythunter02]

Sounds to me like your arrows are too short.



Chootum!

Here. Arrows need to be a little longer.

Sent from my SM-G900V using Tapatalk

[Mertzon Man]

Sounds to me like your arrows are too short.



Chootum!

This !

[ItsLeo]

You rest timing could be off and not lifting soon enough.

[xman59]

Sounds to me like your arrows are too short.



Chootum!

cut the arrows to the front of the riser,, no more problems, the couple feet per second will not make a difference