Just great

[Passafist]

You tube it!!!! You might be amazed.

[Tom]

take it to the bow shop and get a twist on the string and be done with it......

[agtex42]

If you take off the serving above and below it's actually pretty easy to take enough tension off the string to reset the peep with a pair of needle nose pliers. I've done it plenty of times to adjust a peep without a press. Just make sure your pliers are smooth/no burrs and use them like a pair of split ring pliers, only takes a little force to open the string enough to rotate the peep back into alignment. Then all you have to do is reserve the peep in and you're good to go!

Use a sharpie to mark your string on the centerpoint of the peep before you attempt any of this and you should be able to get it reset with minimal headache.

[Rotney]

Yeah I tried the pen thing. Peep popped out.

Thanks for the help. Going to the shop.

[hoythunter02]

Spread the string and put it back in. Was it not served in?

Sent from my SM-G900V using Tapatalk

[Rotney]

Spread the string and put it back in. Was it not served in?

Sent from my SM-G900V using Tapatalk

It was. I don't know what happened. Tied above and below.


Sent from my iPhone using Tapatalk

[hoythunter02]

It was. I don't know what happened. Tied above and below.


Sent from my iPhone using Tapatalk

You can bet the shops will be packed tomorrow but looks like either way you need to have it fixed bud. Good luck

Sent from my SM-G900V using Tapatalk

[bbqfan5909]

Half turn in the string should have it fixed.

[Low Fence]

It was. I don't know what happened. Tied above and below.


Sent from my iPhone using Tapatalk

Peep is supposed to be served in around the actual peep also

[BTLowry]

Have a buddy draw the bow back and just flip it back where it's supposed to go at full draw there is not a lot of tension On the string so it will move easy, then go to the shop and have someone tie it in proper

[wes122984]

Easy at home fix. Push one of the cables towards your riser. You should see your cam rotate. Block cam from moving back with a screwdriver between one of the gaps in cam and the riser. This should leave your string limp enough to split the string by hand.

[Abcdj]

Mark where peep was with a marker, keep the pen in there slide a second pen in and line up mark between the pens and place the peep back in.

[Goldeneagle]

Just take it to a shop and be done with it.

[adam_p]

I've done it. It works in a pinch.

[denimdeerslayer]

And thats why I have the peep with the tube on it to keep it straight. That peep turn normally happens only when pulling back on the biggest buck of your life.

http://www.cabelas.com/product/TruGlo-reg-Centra-Xtreme-Peep-Sight/1354261.uts?productVariantId=3152387&WT.tsrc=PPC&WT.mc_id=GoogleProductAds&WT.z_mc_id1=03436099&rid=20&gclid=CjwKEAjw97K_BRCwmNTK26iM-hMSJABrkNtbLGHpP7w48YnxEu7HB6wiQ_JfvTm8pFsBcsrwZcqP8RoCLYHw_wcB&gclsrc=aw.ds