Announcement

Collapse

TBH Maintenance


TBH maintenance - There will be interruptions this weekend as we prepare for a hosting switchover.
See more
See less

Left blinker and brake light not working.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Left blinker and brake light not working.

    I had a flatbed put on my pickup, 2013 Chevy 2500. The driver side front or back blinker or brake light won't work. All the running lights work. The hazard on the right side blink at a normal speed. The right side blinkers work but they blink fast. I've checked pretty much every fuse. Anybody know what to look for? And blinkers worked before the flatbed. Thanks

    Sent from my SAMSUNG-SM-G890A using Tapatalk

    #2
    You got a bare wire grounding out somewhere. My 91 kept blowing fuses it was a wire that went to the driver side head light , it ran back through the headlight housing and rubbed bare on the lip.

    Sent from my XT1585 using Tapatalk

    Comment


      #3
      What he said^^ you have a ground issue

      Comment


        #4
        All I got is three left turns equal one right turn.

        Comment


          #5
          Being I just had the flatbed put on. Should I be looking for a ground on the actual flatbed?

          Sent from my SAMSUNG-SM-G890A using Tapatalk

          Comment


            #6
            Have you checked the bulbs?

            Comment


              #7
              Originally posted by Ironman View Post
              Have you checked the bulbs?
              No I wouldn't think that all bulbs would go out at once. Front and back blinker and brake.

              Sent from my SAMSUNG-SM-G890A using Tapatalk

              Comment


                #8
                Originally posted by Hawkins View Post
                No I wouldn't think that all bulbs would go out at once. Front and back blinker and brake.

                Sent from my SAMSUNG-SM-G890A using Tapatalk
                If it is the rear bulb out, the front blinker usually won't work either. They're on the same circuit.

                Comment


                  #9
                  The flatbed are LEDs. I'll check the front bulb.

                  Sent from my SAMSUNG-SM-G890A using Tapatalk

                  Comment


                    #10
                    Have you checked the fluids?
                    You may need some brake fluid and blinker fluid!!!
























                    Comment


                      #11
                      Going to wash out all the mud and start checking bulbs and wires this afternoon.

                      Sent from my SAMSUNG-SM-G890A using Tapatalk

                      Comment


                        #12
                        Check fuses- mine has separate fuses for right&left


                        Sent from my iPad using Tapatalk

                        Comment


                          #13
                          It was a fuse. I started pulling all of them and found one blown.

                          Sent from my SAMSUNG-SM-G890A using Tapatalk

                          Comment


                            #14
                            Originally posted by Hawkins View Post
                            It was a fuse. I started pulling all of them and found one blown.

                            Sent from my SAMSUNG-SM-G890A using Tapatalk
                            I bet you still have a short somewhere, something caused overamp and blew the fuse

                            Comment


                              #15
                              Originally posted by Playa View Post
                              I bet you still have a short somewhere, something caused overamp and blew the fuse
                              Was wondering that too. Am hoping they touched a wrong wire when the put my bed on.

                              Sent from my SAMSUNG-SM-G890A using Tapatalk

                              Comment

                              Working...
                              X