Draw Length Question

[Dirt_Dance]

I may answer my own question but I figure I'd ask the experts. I purchased a new Turbo Carbon Defiant recently. WHAT A ROCKET! It just wants to take off. My previous bow was at 65 lbs and this one is currently at 62 lbs. I don't really thing the poundage is a problem. When I draw and fix my anchor points I almost feel like I have to move them forward a little bit from where I reach full draw. Almost feeling like I have to flex my elbow of my bow arm a little bit. When I do the bow wants to take off. The draw length is set at 29.5. Bow is 60-60 lbs

Is there something I am missing or is it a little too long. Release is the same I used when I got fitted and purchased the bow.

[AddisonOil]

Arms spread wide like your flying, measure finger tip to finger tip, then divide inches by 2.5


Sent from my iPhone using Tapatalk

[AddisonOil]

My spread length is 76in.
Divided by 2.5 = 30.4

I use a 30" cam plus a little longer D-loop.

Fits me perfect.


Sent from my iPhone using Tapatalk

[Patton]

Was your previous bow a different draw length or D-loop length? Sounds like if you are having to bend your bow arm, and previously didn't, then the new bow is a shorter DL than the old bow.