Computer Gurus - Help!?

[Bonehead1283]

Alright, let's preface this by saying I don't know much about the detailed internal workings of these comps, but here we go.
I just purchased a new Dell tower http://www.bestbuy.com/site/dell-ins...&skuId=4473100
along with a new Samsung 28" 4K monitor http://www.bestbuy.com/site/samsung-...&skuId=5484022

My goal is to start editing some of this 2.7K video that I have from my DJI drone (don't have the 4K capability yet) with this system. I have loaded some of the video into the system and the videos will play, but when I increase the size to the full screen of the monitor the video loses a good bit of its clarity. When I pull it down to say half of the screen, it is much clearer. Is there a setting somewhere I'm missing or what, because it's driving me crazy to the point of wanting to return it all and start over.

[Draco]

Post again and change the title to "drone camera help" and some one should answer the question. There is a lot of dronies on here.

[CentexRancher]

May have to access your graphics card control panel and under display, you should see something like "adjust desktop size and position". Click that and select no scaling and adjust your resolution to 2.7k which is 2704x1520. Be sure to click the box that says "resize the display if the change in resolution does not fit" or else if you make a mistake, your toolbar and icons may disappear off the screen. From the link, you have an amd card, so to access it, just search your desktop for amd control panel.

[Bonehead1283]

May have to access your graphics card control panel and under display, you should see something like "adjust desktop size and position". Click that and select no scaling and adjust your resolution to 2.7k which is 2704x1520. Be sure to click the box that says "resize the display if the change in resolution does not fit" or else if you make a mistake, your toolbar and icons may disappear off the screen. From the link, you have an amd card, so to access it, just search your desktop for amd control panel.

Thanks! I thought of that last night and tried it and think that did it. I've about decided to return that system and spend a few more bones for a sure enough beefed up machine.