Custom rifle build ?

[Mconner]

So I was just wondering what a full custom built rifle would be with optic anyone have any input?

It would be a .300 win mag
Custom hs pro stock long bedded
Stiller action
30" broughton brrl heavy fluted
Muzzle brake
With a high end leupold scope vx6 or so
With a two stage high end trigger
Custom hydro dipped and action and brrl cerakoted

Just some rough numbers of full build out the door?

[aggieman08]

Roughly $4500 if you use the site sponsor, $6000 if you use HCR.

[Cajun Blake]

So I was just wondering what a full custom built rifle would be with optic anyone have any input?

It would be a .300 win mag
Custom hs pro stock long bedded
Stiller action
30" broughton brrl heavy fluted
Muzzle brake
With a high end leupold scope vx6 or so
With a two stage high end trigger
Custom hydro dipped and action and brrl cerakoted

Just some rough numbers of full build out the door?

ponder these numbers based on your potential build and components

Rem 700 donor action - $450 (blueprint action - add $175)
Stiller action - $1000
Match grade SS barrel - $375 (fluting - add $125)
Fit, chamber, crown barrel - $250
Thread for brake, suppressor - $100
HS Precision used, take off stock - $245 (new - $350)
skim bed HS stock - $100
McMillan stock - $550 to $1000
Manners stock - pretty much the same price as McM
pillar and glass bed stock - $225
Jewell trigger - $215
Timney trigger - $130
dipping and cerakote prices vary from $100 to $300
scope rings - $100 to $400
high end optics - $1000 to $3000+

[rut-ro]

I've built 2 this year. A 257 wby and a 7 mag. Right under 5k a piece. Night force 5-20x50 on both.

[Mconner]

Thanks guys and Cajun blake what am I looking at as far as labor for all that y'all think about 2k in labor?


Sent from my iPhone using Tapatalk

[Mconner]

ponder these numbers based on your potential build and components



Rem 700 donor action - $450 (blueprint action - add $175)

Stiller action - $1000

Match grade SS barrel - $375 (fluting - add $125)

Fit, chamber, crown barrel - $250

Thread for brake, suppressor - $100

HS Precision used, take off stock - $245 (new - $350)

skim bed HS stock - $100

McMillan stock - $550 to $1000

Manners stock - pretty much the same price as McM

pillar and glass bed stock - $225

Jewell trigger - $215

Timney trigger - $130

dipping and cerakote prices vary from $100 to $300

scope rings - $100 to $400

high end optics - $1000 to $3000+

So would labor for all that be around 2k or so?


Sent from my iPhone using Tapatalk

[aggieman08]

If you stick with the stiller and hs stock your labor numbers based on Blakes prices are as follows: 125 fluting, 250 chamber-cut-crown, 100 thread barrel, 100 skim bed, 150 hydro dip, 200 cerakote =$925

That's labor only and no parts.

[txmuleyman]

I had basically the same rifle built last year a few more upgrades. With a NF NXS I'm into it close to $5,700. Call APR

[Cajun Blake]

So would labor for all that be around 2k or so?

Sent from my iPhone using Tapatalk

Not even close to $2k , although some gunsmiths will rape you and charge that much

Parts:
Action
Stock
Barrel

Labor:
Fit, chamber , crown : $250
Pillar, glass bed : $225

A matte action with bead blasted stainless barrel will look old school and requires no other labor.

[kcmarullo]

Mine was $5700 including NF 8x32x56

[txfireguy2003]

I was just taking to APR the other day and my deal is going to come in under 1500, with them providing everything but the action and stock which I already have.

Sent from my SAMSUNG-SM-G870A using Tapatalk

[Gbollom]

Check out horizon firearms. Texas Native in college station. Great family ran operation, Derrick and crew build a nice piece for sure. Anything from a rebarrel to full custom

[bphillips]

APR had me around 3100-3200 with a Defiance action and Mcmillan stock so I would assume they could have yours a bit less. Then just add the cost of glass