Announcement

Collapse
No announcement yet.

help kawasaki mule fan sensor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    help kawasaki mule fan sensor

    has anyone replaced the sensor that turns the fan on

    #2
    Have replaced several. Easy job. Screws into the bottom back saddle tank of the radiator. Just be prepared to spend a few dollars if you get the OEM replacement from Kawasaki. You can unplug the 2 wires and run a jumper to test the fan just to make sure that the thermo switch is the culprit.

    Comment


      #3
      thanks I did jump it and the fan comes on do you remember what it cost?

      Comment


        #4
        Is it causing your fan to constantly run? Just wondering because we have a mule that even after its turned off, the fan will run until the battery dies. I didn't realize it until the second time it did it so we just installed a kill switch to the battery and turn it off when we turn the mule off.

        Comment


          #5
          I replaced mine a few years back. Got it through Kawasaki and it was close to $100. I have seen them on Ebay and Amazon for around $50 though.

          Dave

          Comment

          Working...
          X