Water Jet Cutting Houston Decorative

[El General]

I have a requirement for a small job for a water jet cutter. I am a concrete contractor, and this is for a small sign that will be inlayed in a sidewalk. I am in Houston and the project is in Galveston, so I am looking for someone local to those areas.

There is no specification for this, so I am making this up.

3'6"x12" with 6 words of approximately 32 total characters not including spaces on one line. 3/16" stainless (though if it should be thicker let me know). I will also need a layout showing dimension and font for submittal.

If you do this and would be interested, or you have a recommendation for someone that has this capability and would be willing to do a small job, please reply here or PM me.

Also, if you know something about this and can recommend a specification, I would really appreciate it.

I thought I'd throw it out here before blind googling.

Have a good one,

EG

[AgHntr10]

I have a requirement for a small job for a water jet cutter. I am a concrete contractor, and this is for a small sign that will be inlayed in a sidewalk. I am in Houston and the project is in Galveston, so I am looking for someone local to those areas.

There is no specification for this, so I am making this up.

3'6"x12" with 6 words of approximately 32 total characters not including spaces on one line. 3/16" stainless (though if it should be thicker let me know). I will also need a layout showing dimension and font for submittal.

If you do this and would be interested, or you have a recommendation for someone that has this capability and would be willing to do a small job, please reply here or PM me.

Also, if you know something about this and can recommend a specification, I would really appreciate it.

I thought I'd throw it out here before blind googling.

Have a good one,

EG

We use these guys at work. With the market as slow as it is I'm sure they will give you a price.

http://houstonwaterjet.com/

[TMEC]

Probably too small but you never know. Try Campo Sheet Metal near Hobby Airport.

[El General]

Thanks guys.

[Wall_Hanger]

Delta steel can knock that out. So could triple S. Both do small orders.

[El General]

Delta steel can knock that out. So could triple S. Both do small orders.

I didn't know triple s did water jet stuff.

[Wall_Hanger]

Pretty sure they can do small stuff...they may farm it out. Delta has water and gas burners

[JustinJ]

You might find something cheaper with a CNC plasma machine, and more people willing to do small jobs.

[SaltwaterSlick]

Bowers Sheet metal and fab. On the East side off the beltway. Ask for Jerry. Tell him Maxpro told you to call.


Bowers Metal Works
10303 Pineland Road
Houston, Texas 77044

BMW Office: 832-328-6761 Bowers Equipment Office: 281-458-8891
Fax: 281-458-8896 email: jerry@bowerseq.com

Jerry has 2 machines in service and does very good work.

[GrapeApe]

I think Maudlin still does it off 146 in Baycliff

[Tmag]

I didn't know triple s did water jet stuff.

These were done at Triple S.

[Tmag]

The other side.