Tractor parts source?

[BTLowry]

Massey Ferguson 230 with steering box leak and 3 gaskets/seals are $40

Need to get them out and see if one of the local places has a match

I don't even think there is a local MF dealer

[sailor]

Buy some gasket material......
Make your own....

[Fishy]

Contact Shoup and see if they can help.

http://www.shoupparts.com

[GIL HUNTS]

Try Steiner tractor parts. They ship nation wide. They have on line and paper back catalog.

[BTLowry]

Buy some gasket material......
Make your own....

More like seals than gaskets, if they were flat I could probably do the above.

Couple of local places, Purvis Bearing and Motion Industries probably have exactly what I need if I could find some part numbers

I will check the suggested places above and see what I can find

Thanks

[jlinville]

Do they look like this?

http://www.ebay.com/itm/like/252308896413?lpid=82&chn=ps&ul_noapp=true

[fulmer34]

http://www.yesterdaystractors.com/cgi-bin/store/model_parts.cgi?SearchArea=Massey-Ferguson&&md=230&cat=Steering&r=mcats

New Holland/ ford house wanted a grand for a new clutch disk for my tractor. Found clutch disk pressure plate pilot and throw out bearing for $80 on yesterdaystractors.com. I suggest looking there.

[dpg481]

More like seals than gaskets, if they were flat I could probably do the above.

Couple of local places, Purvis Bearing and Motion Industries probably have exactly what I need if I could find some part numbers

I will check the suggested places above and see what I can find

Thanks

If you can pull the part I'm sure the bearing supply guys can get you an exact match. Ive done that many times and those guys usually know their stuff.

[BTLowry]

Do they look like this?
http://www.ebay.com/itm/like/2523088...&ul_noapp=true

Nope, those are for rebuilding the cylinder
More like this

http://www.ebay.com/itm/Steering-Control-Valve-Upper-Seal-Kit-Ford-International-1066-766-1086-1466-1486-/131232482826

If you can pull the part I'm sure the bearing supply guys can get you an exact match. Ive done that many times and those guys usually know their stuff.

Going to try and get top seal out without completley destroying it this weekend