Announcement

Collapse
No announcement yet.

Fall away rest problem...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fall away rest problem...

    Quick question before I attempt open heart surgery on my bow. I am dead on at 20 yds. but at 30, and 40 yds my shot starts to go left. And I can see it "swim" on these shots a little. Shoud I adjust the fall away rest or my sights????

    #2
    Walk back tune???

    Comment


      #3
      if your shots are progressively moving left the further you move from the target I would move your rest.

      Do a search on walk back tuning.

      Comment


        #4
        move the rest . make small moves.

        Comment


          #5
          Yep, move your rest just a SMALL bit to the left, make sure it hits at 20 yards, then re-shoot the other distances again.

          Easy fix!

          Comment


            #6
            Yeah, move your rest just a hair. Also, you said you see em "swim" a bit out to 30 and 40. You might want to see about having enough spine in your arrow. Not that it would make it go left but the swim part...? Just an extra thought.

            Comment


              #7
              thanks for the advise, just wanted to make sure it was the rest...

              Comment


                #8
                also you might want to make sure you are not having any vane clearance issues.

                Comment


                  #9
                  Also, if your using a bubble level on the sight, make sure it really is level.

                  Comment


                    #10
                    you adjust with the arrow correct??

                    Comment


                      #11
                      Originally posted by Goldeneagle View Post
                      Also, if your using a bubble level on the sight, make sure it really is level.
                      x2

                      Comment


                        #12
                        laser tune

                        Comment


                          #13
                          yeah if your vanes are hitting you can just turn your nock some till they clear.

                          Comment


                            #14
                            Originally posted by Strummer View Post
                            also you might want to make sure you are not having any vane clearance issues.
                            x2 I would do this first before you adjust anything.

                            Comment

                            Working...
                            X