Pse stinger x 2015 help

[stixx]

Trying to bring draw weight up on bow. Do I need to loosen any screws before tightening my limb bolts or just tighten them? The manual isn't that helpful just says some models may need it.

Thanks in advance!

[xman59]

there is a screw that holds the "rocker" in place leave them alone ...
just screw the limb bolts in
,,, on that bow you get between about 1.5 and 2# per turn,,, i do suggest 1/2 or full turns not 1/4 turns,,,,, if you loose count screw them all the way in then back them out evenly

[stixx]

Thank you!