Announcement

Collapse

TBH Maintenance


TBH maintenance - TBH will be OFFLINE Saturday June 7th 9pm for the server switchover.
See more
See less

Scoring Question...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Originally posted by tbgascorer View Post
    The longest, most forward one would be the typical point and the other would measure same to the mainbeam, only an unmatched NT point.
    one more quick question what if the other side matched this common based point on my deer, would it then be possibly typical if determined to qualify for the figure8 rule on both?
    I've always scored the bacward pointing tine NT and the mass normally between matching G3's and g4's.
    Last edited by KingsX; 01-12-2016, 03:39 PM.

    Comment


      #32
      Originally posted by KingsX View Post
      one more quick question what if the other side matched this common based point on my deer, would it then be possibly typical if determined to qualify for the figure8 rule on both?
      If both sides matched common base points, you measure tine length from the bottom of the saddle so to speak. You still get the increased mass measurement between, but you don't get the benefit of tine length to the main beam. It's like double dipping.

      Comment


        #33
        Originally posted by tbgascorer View Post
        If both sides matched common base points, you measure tine length from the bottom of the saddle so to speak. You still get the increased mass measurement between, but you don't get the benefit of tine lenght to the main beam. It's like double dipping.
        Ok so if sides matched at that point would they be typical tines in your eyes?

        Comment


          #34
          Originally posted by KingsX View Post
          Ok so if sides matched at that point would they be typical tines in your eyes?
          Correct

          Comment


            #35
            Originally posted by tbgascorer View Post
            If both sides matched common base points, you measure tine length from the bottom of the saddle so to speak. You still get the increased mass measurement between, but you don't get the benefit of tine length to the main beam. It's like double dipping.
            this^

            you can't benefit both ways from webbing.

            Comment


              #36
              Originally posted by tbgascorer View Post
              Correct
              Thanks for your time I appreciate it.

              Comment


                #37
                Anytime

                Comment


                  #38
                  Originally posted by Shane View Post
                  How do you distinguish between webbing between two points and two points that have a common base?
                  Sorry Shane, I forgot you earlier. Common base points form a figure 8 look atop the main beam. Others do not and it would just be oval type look. Then you have a point originating from another point and NT in nature.

                  Comment

                  Working...