Need ideas on towing F-250 with Dodge 3500

[TxHunter06]

Have you thought about doing something like this?

How in the he.........nvmd some people never cease to amaze me

[Wil Taylor]

Ok, if I go with a tow bar and tow behind my truck. Do I need to disconnect both drive shafts or just the rear on an Automatic transmission with 4 wheel drive.

[JerryC]

Is your dodge equipped with a gooseneck hookup? I know someone with a 24 foot gooseneck, tandem axle , with dovetail.

[Wil Taylor]

Is your dodge equipped with a gooseneck hookup? I know someone with a 24 foot gooseneck, tandem axle , with dovetail.

All I have to do is get a ball.

[JerryC]

All I have to do is get a ball.

PM me. I have one that you can borrow one weekend. I'm about an hour and a half from you, but welcome to it.

[Todd-ty729]

Might have to look into a tow bar. It is 4x4 but has the dial switch. Is that the same as neutral if it's not in gaged

No it is not the same as a manual transfer case.

You could disconnect both drive shafts and tow it on the ground.

Either borrow or buy a 22' + trailer. Bumper pull or gooseneck.

[Will_903]

The transmission guys say to never pull an auto transmission in neutral. I don't know why, but it is bad for them. Transfer case in neutral is ok. Otherwise pull the driveshaft.

[DaveC]

You Get a new lease ride?

My B&W hitch has the ball in the bed if that's what you are lacking.

[..Ambush..]

Any which way you do it that Cummins will yank that P.O.S.-Stroke down the road forwards backwards and sideways..

[Wil Taylor]

Any which way you do it that Cummins will yank that P.O.S.-Stroke down the road forwards backwards and sideways..

10-4, on that.

[Wil Taylor]

You Get a new lease ride?

My B&W hitch has the ball in the bed if that's what you are lacking.

Thanks David but I don't think your B&W will fit my puck system in the dodge. Yes I got another lease ride. I have acquired another truck from my son. So now I have two trucks in my drive way because he can't stay freaking sober and drinking and driving. So I'm taking the ford to the lease.

[ArcoCazador]

I had the same situation I ended up buying a 12000 lb trailer tilt, then selling the trailer after I was done. I think I might of loss maybe 100 bucks in the difference but it was worth it. if you built a tow bar you better built a heavy duty one and bolt directly to the frame

[jmoore2006]

When are you headed out? I've got a 20' maxey you can use. Pulled a few 250's with it

[Wil Taylor]

When are you headed out? I've got a 20' maxey you can use. Pulled a few 250's with it

I'm really not sure. With my work schedule I never know when I'm off. But thanks for the offer.

[DaveC]

Need ideas on towing F-250 with Dodge 3500

Thanks David but I don't think your B&W will fit my puck system in the dodge. Yes I got another lease ride. I have acquired another truck from my son. So now I have two trucks in my drive way because he can't stay freaking sober and drinking and driving. So I'm taking the ford to the lease.

Well if we could ever line up days off where we weren't both preoccupied I could drive it or the dodge out there with you.

I have few days in mid September set aside for a lease trip if I get all my other to-dos done before then.