Light bar on a 4wheeler ?

[Texas8point]

I'd like to add a 8" or 12" light bar on the front of my Honda 4 wheeler.
Ideally on a separate on off switch that the factory light switch.
Any recommendations on placement ? brand ? installer ?

[blntrey3]

I got mine on ebay.....and it works great! I would put yours in area on bumper in front of the Honey Comb Grill between the metal bars or even use metal bars to attach the light

[texaspyro21]

I mounted mine to the gun rack on the handle bars. Figure i'd want the light to mostly shine where the handlebars are pointed. Used L brackets to attach it.

I bought mine from amazon. Just look for good ratings on there.

[DoubleGProstaff]

Love my extreme led, 14 inch give tons of light.

[DCT]

Love mine. Got it off of Amazon. I made a bracket that bolted to the bumper. It's wired on a switch by itself.

[Wits_End]

I installed two cheap Amazon 6" LED bars, one on left and one on the right on front rack, adjusted at 30 degrees or so. I can see off to the sides for turns as well as straight forward. Manually connect to my accessory power port. I figure that stock lights are enough to get me going, if I plan to ride a while, reach up and plugging it in is not a big deal. Could always add a relay and handlebar switch. Didn't like the look of it on the handlebars and when you turn, the light would point down, so I didn't like that.

[SB09]

Buddy of mine has two 6'' bars stacked in between the headlights on his Rancher. Fabbed his own bracket. Can't mention any specifics on brand since we have a forum sponsor here that sells LED bars, their name is Extreme LED. You want CREE emitters, do not get Epistar emitters. Less life, and not as bright on the Epistars.

[Colton]

Pm sent

[Texas8point]

I was thinking mounting it here using top attachments ?????

[Bowtech32]

I was thinking mounting it here using top attachments ?????

looks like a perfect spot to me

[SB09]

I was thinking mounting it here using top attachments ?????

That's exactly where the buddy of mine I mentioned above has dual 6'' bars at. Not in the way of the rack, behind the bumper line so it's protected from front impact somewhat.

[TxGiant]

Maybe use these to attach it there to the top?

http://extremeledlightbars.com/led-light-bar-tube-mountbracket

Thats if they fit, not sure if they will be too big

[Texas8point]

I found this photo and now the source..... will post pics when finally get it done ! Thanks to all.

[bwool]

Been wanting to do this in green or red.

[AddisonOil]

Extreme LED! Good people, good product!