Deerview window question

[tef]

Thinking about putting these in my new stand but have a question/concern. I noticed it says the hinge window mounts from the inside, so do they come with a flange or edging to block out rain from the outside?
I'm going all out on this blind so it will last for a long time, don't want water leaking in etc.
Thanks for any help.

[Chad74]

I put mine on the outside, and used flashing for a drip edge on top. Glued a plastic spacer with a hole in it on the bottom edge of window frame for string to run through so I can open and keep it open from the inside.
Might not be right but I prefer my windows to open outwards.

[BWDean]

They don't have anything like that but mine are mounted on the inside around a 1.5" square tubing frame, so the window is inset a bit. Doesn't leak much, but like said above some flashing over the window would help a lot. To make it look better, try a steel building place. They will have colored trim that would be easy to install.

[tef]

Ok, gotcha. Sounds good. Ive seen windows done that way, may tinker with it and see. Thanks

[tef]

I'll be using 1.5" as well. My son builds metal buildings, roofs,etc. He should be able to make me some trim, edging, etc. Thanks for the replies.