Need some help with a OA cutting rig

[savin yours]

I was walking through my local TSC and I found a very small cutting rig on clearance that I could use in the garage. It's the #1 gas pony set, but was missing some parts. So for $50 I picked up both bottles, hose, welding tip, Stryker and goggles. Now I had planed on using the regulators from my rig at home, but the acetylene reg won't fit. What's my options? I searched for an adapter, but I don't know the specifics on the connections. Thanks

[savin yours]

[ATTACH]723096[/ATTACH]

[BloodSpiller]

Pressure gauges are the missing link here.

[Draco]

If the bottle isn't full then I would have the right valve put on it when you get it filled.

It might not be an acetylene bottle. Been in the business for a long time and never seen an acetylene bottle with any other threaded fitting but what you already have.

[savin yours]

If the bottle isn't full then I would have the right valve put on it when you get it filled.



It might not be an acetylene bottle. Been in the business for a long time and never seen an acetylene bottle with any other threaded fitting but what you already have.

It's full and it is acetylene.

[be12hunt]

Looks like you are missing the regulator. I'm not an expert though.

[savin yours]

Looks like you are missing the regulator. I'm not an expert though.

Yes, the kit is missing the reg. I'm trying to use my own regulator, that's what's in the pic.