do they make a longer broad head. i just ordered some a they are only 1 in in length. oklahoma requires 1 1/2 in long. thanks in advance
-
-
What does the length matter. I could understand a requirement on the cutting diameter but lenghth -
what the heck is the purpose of a broadhead having to be 1 1/2 in. long.Comment
-
i dont know but i was realy looking forward to useing these.Comment
-
Are you sure they are setting a minimum cutting diameter of 1" rather than a length?
I think I'd check that again. That would rule out a whole lot of today's broadheads unnecessarily.Comment
-
Straight from the OK hunting handbook.......
"Broadheads: Hunting type points not less than 7/8 inches wide and not less than 1 1/2 inches long."
I hunt in OK too, and actually did not know this. I have to go check my broadheads now.Comment
-
Legal Means of Taking
Bow: Minimum of 40 pounds draw weight. Hand-held releases are legal.
Broadheads: Hunting type points not less than 7/8 inches wide and not less than 1 1/2 inches long.
Illegal Devices: Laser sights and any device that permits a bow to be held mechanically at full or partial draw.
Firearms Restriction: No person may carry or use any firearm in conjunction with archery equipment during the archery season while hunting deer, except under provisions of the Oklahoma Self Defense Act.
Hunters are allowed to carry both archery equipment and a muzzleloader during the muzzleloader season provided they have the appropriate licenses and follow other muzzleloader season regulations. Hunters also are allowed to carry both archery equipment and legal firearms during any modern gun season, again provided they have the appropriate licenses and follow other regulations to participate in those seasonsComment
-
I guess you need to move to Texas because thats just crazy talk.LOLComment
-
Does the 1 1/2" include the threaded shank? If it does, mine are almost two inches long. I would give your dept a call to clarify.Comment
-
Comment