Welding Guru's - I need some advice!

[TC]

I am wanting to get a small (110v) wire welder to use on small jobs like BBQ Pit add ons, Building small pits, Wood racks, etc... I am considering this set up

http://www.walmart.com/ip/Amico-Power-Corp-MIG-115-Volt-135-Amp-Welding-Machine-with-Kit/23911253

Is this worth it? What do yall suggest?

Thanks,
TC

[dhillis]

http://www.tractorsupply.com/en/store/hobart-handlerreg%3B-125-ez-flux-cored-welder

[CSF45]

I've got a Lincoln electric 140hd I really like. The hobarts are good too

[dhillis]

There was a thread about this just a few days ago that I can't seem to find. Anyone remember it?

Found it.

http://discussions.texasbowhunter.com/forums/showthread.php?t=533197&highlight=welding

[TC]

Thanks!

[Dale Moser]

Go with the Hobart over the walmart one. Miller, Lincoln, or Hobart.....220v if you can swing it at all. 110 is really slow....

[RR 314]

I second the 220. I would go with a crackerjack Lincoln stick before the 110 wire if you want to do anything with pits/smokers. If you want wire, look for a used Millermatic over anything 110 IMHO. Slow and difficult to get good penetration with the 110.

[Dadeo]

I have been in the welding supply business for 24 years.

Please buy a name brand like a Lincoln or Miller.

They cost more but you do get what you pay for.

And you can get parts if the need should arise.

[kmitchl]

I have been in the welding supply business for 24 years.

Please buy a name brand like a Lincoln or Miller.

They cost more but you do get what you pay for.

And you can get parts if the need should arise.

Very good advice!

[Steelforce 15]

If it's from Wal-Mart it won't hold up, as far as tools, don't waste your money..Miller is King of wire, Lincoln king of stick, Hobart would be last choice for either..I spent 8 yrs running stick and wire..X ray on both..Miller, Lincoln, Hobart will last a lifetime