Cost to wire a shop?

[ByronF]

Any idea what kinda price I'm looking at? Electricity is stubbed out to the shop. Needs a breaker box. Shop is 30x40 with a 20x40 porch. I have the lights. Need it wired in conduit, 7 lights total hung with switch 4 inside 3 outside and 5 plugs.

Also if there is electricians close to winnie that wants to give me a price let me know.

[poisonivie]

Mine ran about $1900 for about the same.

[ByronF]

Thanks. 1st quote was 1850.00 so he is in line. Just seemed high

[mavrick]

5 plugs in a 30x40 shop?

[ByronF]

5 plugs in a 30x40 shop?

Yes why? One on each wall and one at the work bench.

[Texastaxi]

Yes why? One on each wall and one at the work bench.

I'd double that, at minimum.
If it were mine I'd have a receptacle at least every 10 feet.
It shouldn't increase the price that much and you'll appreciate the convenience in the long run.

[masonred]

What was said above, more and more plugs

[mchildress]

X2 can never have too many plugs. They fill up quick.

[GrapeApe]

That is good advice. Triple the amount you think you'll need. Then add four.

[scotty]

My shop is 20x20. I have two 110v on each wall and four up above on the purlins. A
220v by the door. Ran me about $800 a few years ago.

[TRich]

Does it need to be in conduit? I just did my barn, a buddy and myself. Went to Lowes and got everything and did it our selves for maybe $250. Put my wire in PVC.

[Rubi513]

We charge $120.00 hr. for a Journeyman and apprentice. $1,850 isn't bad.