Bench top built out of 2x6x18 and 2x8x18 oak screwed together with pocket screws. The wood was salvaged out of my grandparents garage. I recessed a 36" piece of 3/4" aluminum square tubing which I then ripped a channel in it to form a track. The sled is a piece of 1x6x10" oak that will hold the press. The idea is to be able to slide the components in and out as I need them. I will build separate sleds for the powder dispenser and other tools.
The cedar wader rack was just thrown together out of some rough cut I had laying around.
The cedar wader rack was just thrown together out of some rough cut I had laying around.
Comment