need feeder for kawasaki mule

[Jmh05]

I need a small tailgate type feeder to attach (somehow to the front grill guard) for my mule. I would like it to plug into the cig lighter and have a button or something to push from the driver's area to spin corn.

Please post any make/models that have worked for you and est. price.

Thanks!

[TexbowJ]

You can get the cord w/switch at Academy. About $30, I think.

[Tmag]

Moultrie makes one they sell at WM. It is removable with brackets you can mount to the grill.

[Stins]

Jeremy if you want to build one I have a small barrel you can use. I picked up a lower unit from Karl for pretty cheap too.

[slim]

I have all season on my ranger that hangs off of the tail gate.works great

[DaveC]

http://www.academy.com/index.php?page=content&target=products/outdoors/hunting/feed/feeders&start=0&selectedSKU=0338-03614-0050

I recently purchased this feeder from academy and mounted it on my quad.
I added side handles and a handle for the lid.
It hangs & is easily portable, but I had to add some wood via U-bolts to my rear rack to make it sit level to the ground.
Then I camo'd it to nock the shine off.

It throws about a 4' wide swath, but that might be increased by lowering the feed plate?

The only flaw I see so far is being made in china & the availability.
Academy seems to only want to carry 1 per store.

[Jmh05]

Thanks guys. I'll check the academy, walmart and with stins on creating one. I need to have one by the 20th.

[ByronB]

tailgate feeder



My Dad bolted this tailgate feeder to the back of my rig. I ran the wire around the side of the Mule, up the poles and across to the front poles. The switch is attached so I can reach up with my left hand and hit the button. The rest of the wire goes across the front of the Mule fram and I can plug it in to the electrical plug.

[az2tx]

I bought the 50 lb Verdondo feeder and it is perm rubber mounted on my Mule, it is also hard wired into a toggle switch, works great