Who can make this for me?

[LloydMcCoy]

I only need 6 lock spaces

[Bill]

Here' another on off Google. Sharelox.com
I'm assuming after you put the 8 carriage bolts in with nuts, you weld the nut to the bolts.

[White Falcon]

Easy to make if you have a chop saw and a welder. I sold both when I retired!

[stevieray54]

Boy is sure like those instead of the daisy locking we have

[LloydMcCoy]

Yeah. We used to have about 20 links of chain now it's just all locks to locks

[Leon County Slayer]

You could also go electronic with code entry so you can track who is in and out and when. Just a thought.

[LloydMcCoy]

Deer lease / oil field traffic/ easement so electric is out

[1riot1ranger]

someday someone will invent a combination lock and you won't need all those keys

[cvanbrunt]

Would be easy to make, wish I were near Lubbock. I dont see the point of the U shaped flat bar that the handle is close to. It doesnt appear to slide into the channel as it is locked up in the picture.

[Patton]

Easy to make if you have a chop saw and a welder. I sold both when I retired!

Isn't that the opposite of what you're supposed to do?

I have the drum one figured out but can't figure out the sliding one. Going to keep looking and deciphering..

[wcg89]

I have built a lot of these for the ranch I used to work for. They are awesome I made one for a place that had a ton of different people and companies in and out all the time it had 27 locks on it.

[Witchgrass]

Here's one I saw a while back. Pretty cool!