Where can I buy a threaded insert like this?

[LeanMachine]

Working on a project and I need something like this http://www.aa-mfg.com/threaded-inser...-3-4-16-thread

Has to be 3/4-16 thread. Ace and tractor supply had nothing like that with those threads. Can check lowes or home depot next week if yall think they would have something. I don't have a grainger close by. I'd just order that one from the link but I refuse to pay 10 bucks shipping.

[davidamfan]

McMastercar.com, Grainger.com

[Ol Thumper]

I would first check at a Fastenal if you have one close by. If not I would try Lowes, HD n so forth but you may spend more than $10 in gas looking for it lol.

[tex4k]

Check at some of the farm tractor service dept. or hydraulics service places.

[Gummi Bear]

Looks like what we use for spherical rod end.

We call it a weld in bung in the off road fabrication world.

http://www.rodendsupply.com/parts/weld-in-threaded-bungs/

I like buying from these guys. Quality parts, and good service. Not cheap, however. You get what you pay for.

[holepuncher]

Fastenal , it looks like a 3/4" set anchor ?

[LeanMachine]

Thanks guys. I may bite the bullet and order it....but i wont be happy about it!

[keystone]

its a 3/4" or 1" rigid coupling,call any electrical supply house in your area

[Draco]

You could use an all thread coupler and grind the corners off. You can get them at any Ace hardware.

[stevieray54]

Plumbing store as well if you have a Moore Supply

[Felix40]

Et fasteners in Tyler has them. I could almost guarantee it. I broke a bolt off on a generator and had to get one from them. He had about 20 different sizes and thread patterns. Threaded rod coupler.

[brushtrooper]

Check oilfield supply stores too. National Oilwell, Total service supply, Charter....etc

[Tx_Wader]

It looks like a standard coupling. Any plumbing supply store should have it.

[Andy]

Think I have some on the rigid pipe that my son left here when he was working for automatic logic. like they said check the electrical dept at these stores....Andy

[BloodSpiller]

3/4 - 16 is fine thread. Plumbing nor electrical supplies will have it and it's likely you won't find it in an all thread coupler. McMaster Carr would be my best guess.