Have you adjusted the sensor that stops it when it hits something, mine does this in cold weather or strong wind sometimes, adjust the sensor to the highest setting and grease the hinges with thinner grease or oil and give it a try.
Thanks, Stan and everyone else. Yes, I still have the book and was wondering if I should try to reprogram or look at fuses or the lubrication. Looks like I'll start simple and I may get to reprogram it.
I have a mighty mule gate opener that was working but being a --- sometimes. Only used it about a year or so before removing an storing it. It's a model 500.
If you could use this pm me your mailing address an I will send it to you.
I had a similar issue with one of my clients gates and ended up replacing the battery, if there is even a small difference in voltage and amps, gate opening was iffy at best.
We had one doing the same thing but it was an Apollo. I started looking at it and found one of the wires had a bare spot up against the electric motor on the gate itself.
I love my mighty mule. It's kept right on working even when it's gotten down to -15 here. I have my on a 12.5 w of solar and it just keeps on rocking. The only time I've had a problem like what you're describing was when the wind has blown so hard it triggers the sensor. I did what was suggested earlier and turned the sensor down all the way, now no issues.
Comment