Need to make a sight tape?

[oktx]

I have a single pin sight that came with a blank tape. Is the only way to make one is range the yardage and mark on the tape? If this is the only way I'm concerned it will look like a 2 year old did it with my poor writing skills.

I have the 20 set and I'm not doing this until AFTER the season.

[Buck assasin]

WE USED THIS TO GET A SIGHT TAPE DONE http://www.thearcheryprogram.com/products

JUST NEED TO KNOW WHAT YOUR BOW IS FPS AND WHAT THE WEIGHT OF THE ARROWS ARE

[adam_p]

I use the program above but I didn't use the FPS and arrow weight part of the program.


They have a scale you can print off. Print it off and attach it to your bow. Sight it in at 20 and make note of where that is on the scale. Then sight in at 40 (farther the better, 60+ would be great). Make note of where that is on the scale. Plug the 2 numbers into the program and print off your tape. Go out and test your yardages, should be spot on.

[oktx]

Had to buy the program I guess?

[old killer]

Lancaster Archery has a premade tape with around 15 tapes per page. You sight in at 20yds and 60yds then find a tape that matches those marks. Every yardage will then be right. I have used them for 20 years. Scott archery also has some.

[adam_p]

Had to buy the program I guess?

Yeah I think it was like $20