5.9 injectors

[quackerback]

where is the best place and best brand of injectors for an 05 5.9 cummins

[solocam_aggie]

In this one. Curious myself

[ABroussard]

Factory Bosch. Or industrial Injection. But with II you gotta dig deep in the as* pocket!

[Gummi Bear]

They are not cheap no matter where you go.

I just went through this.

Buy them local, in case one is no bueno. There are no new Bosch injectors, everything is rebuilt.

I bought mine at the local Cummins house, they were $420 each.

I wound up needing to replace the injector tubes as well. They are roughly $40 each.

Unless you have a bunch of performance enhancements on your truck, there is no benefit in getting higher flow injectors. Factory injectors will support quite a bit over stock.


There are some tempting places on the interweb offering these injectors for half price, I'm not willing to risk that kind of money on unknown company rebuilds, with no warranty.

[NMStickFlinger3]

Industrial Injection is a great product, but their service is the WORST I have ever dealt with. I just replaced my #1 a couple months ago. I ordered a stock replacement from Ind. Inj. Received new injector, installed and all was well. Drove out the driveway and 1/2 block down the street my truck started shaking, knocking and blowing black smoke!! Got it home, removed injector and called Ind. Inj. Sent it back and had to wait 3 weeks for them to receive it, test it, rebuild it (since for some reason it got out of calibration after I installed it) and receive it back and install it. I made more than several calls to them regarding updates and shipping, and every time they acted like they never talked to me and didn't know who I was!! Either way....great products, but their service is absolutely horrible. I would also look into DDP injectors. What ever you do, DO NOT buy a reman injector, and ALWAYS REPLACE THE SUPPLY TUBE if you replace an injector!!!!

[Sasquatch82]

Check with tsd

[berettadave]

Call James Northum at JTT in Midlothian(972-467-3702). He pulled my injectors and sent them to F-1(He's one of their approved dealers)to have them rebuilt and flow matched. I had them do the 40hp upgrade on them too. I have put over 180,000 miles on them since then and they have been perfect. Also would be a good time to install a 2 micron fuel filter between the factory filter housing and the injection pump. I promise it will drastically extend the life of the pump and injectors.

Dave

[CountryLegend]

I've got 100hp Industrial Injections on my '05

[twistedmidnite]

I'm another industrial injection customer. They can also rebuild your injectors

[quackerback]

i hear bad comments about remanned ones. what about the ones with a warranty rebuilt by a reputable company.

[berettadave]

i hear bad comments about remanned ones. what about the ones with a warranty rebuilt by a reputable company.

I wouldn't trust just any remanufactured ones. I know F1 really knows there stuff and does a great job(better than factory IMO). I've heard good things about Industrial Injection too but I have no personal experience with them.

[TXBlkCld]

West Texas Diesel Performance. Cody will take good care of you.

[devildogcummins]

Don M. with F1, or exergy would be my picks. I have F1 flux 4.3 and love them