Anyone have the On Target program?

[Mudslinger]

If you would, can you please run some numbers for me to see possibly what speed and FOC I would be getting with this set up? Thanks in advance if you can and will.

2009 HCA Speed Pro 33" ATA 340-350 fps 7" BH
G5 Meta peep and string loop only on the string

Arrow:
Gold Tip Big Game100+ 10.6 GPI cut to 28" .250 spine equals 297 grains
.246 Accu-Lite insert @ 11.40 grains
Nock @ 12.6 grains
FOB'S @ 26.8 grains
BH, 315 grain 2 blade single bevel

Total arrow weight: 663 grains.

Also could you run the exact same numbers but substitute 3 Blazer vanes (17 grains) in place of the FOB's.

Thanks.

[TxCazador]

Need to know what draw weight
and is it HCA mini or large?

[LeanMachine]

Buffalo setup time?

[Mudslinger]

70#'s and the large cam with 29" draw.

Yep on buff time.

[muddyfuzzy]

you can download a trial copy for free.

[TxCazador]

Mudslinger, sorry to take so long. Been out at stock show all day.
V 230
Grains per lb 9.466
Foc 22.02 %
KE 77.88

With Blazers
v 233
gplb 9.323
foc 23.01
ke 78.76

Note: all these are with the nock of 12.6 total, not with 11.6 of bushing/pin weight
Also this setup shows that the arrow is slightly in the weak side of good.

[enewman]

Mudslinger go to a kinetic 200 put a brass hit insert and see if you can bump that foc up a little more. Arrow would be in that 726

I know you like that high country, but that new rpm 360 should get you at least 10 to 15 Fps on the minimum side. Unless it's just a flop. Have to wait till feb to find out

[Mudslinger]

Really do not want to go above 700 grains unless absolutely necessary. I am going to go with the standard GT insert which will add about 11 more grains and a collar from 3 Rivers to add strength to the front, about 5 grains, or I may foot with an aluminum shaft up front. Broadhead will be the one piece stainless steel forged Ashby single bevel 2 blade at 315 grains.

Enewman, what RPM 360 you talking about?

[Mudslinger]

OK I see what the new Bowtech is, RPM 360. Not sure I want to shell out $1000 for a bow that might give me 15 more fps and I really do not want a shorter bow and less brace height than I have right now. If that bow could show me 20+ fps gain over what I have then maybe, but for that matter if I really wanted to go with the speed and the heavy arrows, I would have to look at the PSE and I know how those draw. Mine gives me almost everthing I want and 270 fps with a 560 gran arrow ain't bad.

[BowTech2010]

Bow tech rpm 360

Edit. .. you figured it out before I could post

[enewman]

You can stay under 700 with the kinetic 200 with factory insert, but they suck.

692 gn