Stack it and measure it
Announcement
Collapse
No announcement yet.
Does this look like a half cord?
Collapse
X
-
A rick of wood is half of a cord. A rick should measure 2 ft length wood by 4 ft high by 8 ft long. Most wood stove inserts will not hold wood 2 ft long so a lot of people cut the wood 18 inches. Your close to 4 x 8 but the wood is not 2 ft long. That is the way a lot of people sell it though.
Comment
-
Originally posted by gonehuntin View PostNo way is that a 1/2 cord. 1/4 cord if that. Looks like the logs are 18 inches. Another way to rip you off.
I cut mostly 18" wood but I never ripped anybody off. Just adjusted the height and length to still get 128cu ft. Sold to lots of people that were amazed that my cord would not fit where the last guy had put their cord too. Lots of crooks in the business.
18" wood was easier to sell too, would fit a fireplace, wood burning stove etc. Could sell it to anyone and burn it in my insert too
Think the OP got about a 1/4 cord from the looks of it.
1/2 cord would fill up a long bed truck and be above the bed rails, cord would fill a 16' trailer
I cut a 1/2 cord of 12" wood once for a guy that had a little wood stove. Never did that again. Just as much cutting and splitting as a full cord
Comment
Comment