Sight adjustment

[WCI]

Mathews Jewel and Extreem sight. Problem is it continues to shoot low and I am all out adjustment. I can get a 20 Yrd but that is it on pins. It is set at about 40#'s. GF's bow..

Any ideas??

Wilk

[Fishndude]

So the sight housing and the pins are bottomed out?

[wes122984]

Move peep. Assuming knock point is in correct spot

[PYBUCK]

Lower your anchor point. That should get you started

[WCI]

So the sight housing and the pins are bottomed out?

Yes....

[Bowhunter1994]

contact the rest company.. they may have a bracket that lowers your sight... i know blackgold does...

[paco]

Check the arrow rest, peep sight, and nock placement. Make sure nothing came loose.

[Gunslinger]

Pandora's box , so many variables...I don't know the sight , can you flip the mount ?

[FLASH_OUTDOORS]

post a pic of the sight. the bracket may have an off-set in it. meaning, depending on how you have the bracket mounted, you may be able to flip the bracket around to gain the extra space you need.

[FLASH_OUTDOORS]

Pandora's box , so many variables...I don't know the sight , can you flip the mount ?

haha sorry bro i missed this!!

[WCI]

I retied the peep just a bit higher and it made a dramatic difference. Strange but I was so focused on the sight itself I forgot about the peep. Typical engineer mistake I guess.. Thanks for the assistance to all.


Wilk