installing a leveling kit on my 2010 chevy 4x4 this week...

[GeauxTigers]

The kit is Motofab spring spacers....Any tips or tricks I should know??

[jaime1982]

Post some before and after pics when you can.

[TxHunter06]

leveling kits are pretty straight forward, shouldn't take more than a couple hours to do.

[GeauxTigers]

Ten4

[TexAg14]

It's not bad at all. Just use a good set of jack stands. Which brand are you putting on it?

[jkk831]

I had the dealership do it.

[rcarlisle85]

The kit is Motofab spring spacers....Any tips or tricks I should know??

Probably won't need it but I would suggest getting an alignment done after you install.

[Boyd1212]

Make sure you get an alignment after. Mine was way off after the install. And it helps if you have a buddy with a lift.

[bowhntrmatt]

Chevy? Don't they all have torsion bars?

As stated, be sure to have an alignment done right afterward.

[Marco]

They do have torsion bars

[BowSlayer]

Chevy? Don't they all have torsion bars?

As stated, be sure to have an alignment done right afterward.

2008-up don't

[Swampa]

2008-up don't

Depends on of its half ton or larger. My 2500 2010 has keys.

[BowSlayer]

Depends on of its half ton or larger. My 2500 2010 has keys.

That's true. I was thinking 1500s

[TexAg14]

1500 should be either a doughnut or strut block that goes under the strut.

[bowhntrmatt]

Gotcha. My 08 2500 has torsion bars. I have that special key changin tool if anyone needs to borrow it.