Help with wheels and offsets

[MDC]

In need of some help. I have a 2007 Tacoma TRD with a 3" lift. Currently I am running on stock RIM and Tires. BF Goodrich AT 265/75/16. I want to get new wheels but keep my current tires.
According to a spec sheet I found online, I have a 6 lug 5.5 inch or 139.7mm with a Medium Offset.

I am looking at getting the Ballistics Outlaw EMR902 Wheels. Problems is, it gives me two choices as far as offsets and I am not sure which one I should pick.

16x8 bolt pattern 6x139.7 -6 offset
or
16x8 bolt pattern 6x139.7 +20 offset

I know the GS can help a brother out.

[jmock87]

In need of some help. I have a 2007 Tacoma TRD with a 3" lift. Currently I am running on stock RIM and Tires. BF Goodrich AT 265/75/16. I want to get new wheels but keep my current tires.
According to a spec sheet I found online, I have a 6 lug 5.5 inch or 139.7mm with a Medium Offset.

I am looking at getting the Ballistics Outlaw EMR902 Wheels. Problems is, it gives me two choices as far as offsets and I am not sure which one I should pick.

16x8 bolt pattern 6x139.7 -6 offset
or
16x8 bolt pattern 6x139.7 +20 offset

I know the GS can help a brother out.

I have a 12 Taco that I put new wheels and tires on...I run a 0 offset and I just barely have enough room for the wheels and tires to clear the caliper, etc.

Personally, I would go with the -6 offset since your losing an inch of backspace at least. You might not clear the calipers with the +20's.

Also, the wheel and tire will be further out of the wheelwell with the -6 offset...personally I think that looks better

[MDC]

Awesome!! Thanks for the info.